Telecommunications
There are 84 products.
Mast support for recessed wall in "I" reinforced 250mm by Televés ref. 2410 The mechanical elements are treated with the RPR (Protective Reagent Protective Coating) protection system, which adds an additional protection shield against oxidizing agents to the standard zinc coating process of all elements.
Bracket for Screw Mastil Televes Bracket in the form of L to attach an antenna mast to a wall. Two equal supports are necessary to hold the mast in two points to be able to maintain it vertically.
Mast 1.45m x 35mm x Thickness 1.5mm Rpr BoxableMASTIL RPR BOXABLELong: 1.45 Meters Perimeter: 35 Millimeters Thickness: 1.5 Millimeters
MACHINE PLUGGED 1.45 X 35 X 1.5 MM TELEVES 2407 Masts for antennas with sections to assemble and in this way form a longer mast. Manufactured in galvanized steel Application: Installations where it is required to locate terrestrial TV antennas and radio at a high elevation.
MOUNTED ANGLE SUPPORT 500 MM TELEVES 2406. Reinforced claws to fix masts to a wall, both for screwing, as for embedding. Application: Installations where it is required to place terrestrial TV antennas and radio in a mast to a wall. Made of zinc-plated iron.
Reinforced claws to fix masts to a wall, both for screwing, as for embedding. Application: Installations where it is required to place terrestrial TV antennas and radio in a mast to a wall. Made of zinc-plated iron.
WALL SUPPORT 500 MM ANTENNA TELEVES 2404. Reinforced claws to fix masts to a wall, both for screwing, as for embedding. Application: Installations where it is required to place terrestrial TV antennas and radio in a mast to a wall. Made of zinc-plated iron.
Mast support for bolting wall in 300mm Application: Installations where it is required to place terrestrial TV antennas and radio in a mast to a wall. Made of zinc-plated iron
Since there is a wide range of mechanisms in the market, this TV / R-SAT aerial socket fits in the vast majority of series without any additional effort. There are two types of TV / R antenna sockets - SAT: Reference 5226: Single or final branch SAT antenna socket Reference 5228: SAT intermediate lead antenna socket The sockets and junction boxes incorporate a new flange model whose main advantage it consists of facilitating the visualization of the connection in locations where the outlet is close to the ground. The tightening design of the live has been improved to meet the specifications of cable operators. Easy and quick to install
Central made in armored zamak chassis, designed to reamplify an ICT installation. This type of installation covers the band 5-30 MHz, 47-862 MHz and 950-2150 MHz, where the MATV signals are the same in the two down cables. Being an amplifier whose application is in ICT reamplifications, it will only be necessary to connect the two input cables and the two output cables with the amplifier turned off.
EMC bridge 48 mm Plug-in. Connector F load 75ohms For Televes T03 Series
Wall bracket DIN 498 mm, with 1 feeder and 10 modules T05 / T12
WALL SUPPORT "L" TELEVES 7393 Surface galvanized and treated with our RPR process to increase its resistance to corrosion.
