Fixings and Screws
There are 83 products.
Abrazadera APOLO reforzada M8+M10, con soldadura en cruz y tornillo hexagonal impronta ph+ranura con arandela imperdible
Abrazadera APOLO reforzada M8+M10, con soldadura en cruz y tornillo hexagonal impronta ph+ranura con arandela imperdible
The spatial dispensing valve of the AGII nailer ensures the correct dosing at room temperature. APOLO gas cylinder for AGII gas nailer with safety cap. Capacity for more than 1,200 rounds. It can be used between temperatures of -10o and +30o.
Strap made APOLO in galvanized sweet steel. Fire approved if used with AGII gas washer.
Apolo MEA GKD nylon stud is fixed directly by not needing pre-drill. It is easy and quick to install on plasterboard for light loads. Manufactured with 30% fiberglass quickly drill the plasterboard. Used with wood screws in diameter from 3.0 to 4.5 mm. The screw can be longer than the plug as the screw can drill and pierces the plug.
APOLO base accessory black flange for fixing with gas nailer. Fixation with most nailers: BEA, SPIT, HILTI(GX100), W'rth, Berner, Spit, Powers. The basebrid is clipmed to the mouth of the gun. It can be used with any type of flange and is adjustable thanks to its 4 side openings.
The NP shock plug from Apollo MEA is suitable for quick assembly of gutters, slats, preframes, profiles, etc. The exact match between plug and screw offers high clamping values. Reinforcement at the head of the plug to prevent it from breaking when inserting the screw. Screws with PZ imprint that allows to unscrew and remove the fixation. It withstands temperatures between -40oC to +80oC. It is presebta in acerp and A2 stainless steel materials. In box format and in blister.
The NP shock plug from Apollo MEA is suitable for quick assembly of gutters, slats, preframes, profiles, etc. The exact match between plug and screw offers high clamping values. Reinforcement at the head of the plug to prevent it from breaking when inserting the screw. Screws with PZ imprint that allows to unscrew and remove the fixation. It withstands temperatures between -40oC to +80oC. It is presebta in acerp and A2 stainless steel materials. In box format and in blister.
The metal anchor with Apollo MEA DT expander jacket and hex screw is suitable for through bindings in medium loads. CE approved anchorage for non-cracked concrete. Cone with anti-spin fins for quick and safe expansion and shirt with anti-rotation bumps to prevent rotation in the hole. In addition, the shirt has been made of progressive chamflan to facilitate the expansion of the cone.
The metal anchor with Apollo MEA DT expander jacket and hex screw is suitable for through bindings in medium loads. CE approved anchorage for non-cracked concrete. Cone with anti-spin fins for quick and safe expansion and shirt with anti-rotation bumps to prevent rotation in the hole. In addition, the shirt has been made of progressive chamflan to facilitate the expansion of the cone.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
M6 metal APOLO clamp with two screws. Side nail specially designed for easy pre-installation, allows to open and close the clamp without the need to completely unscrew the side screw. Available in belted and bicro-matted. It comes in a box and in a self-service plastic bag.
Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking
Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking
Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking
Multiclip open APOLO clamp for gas nailer with side joint for serial mounting. Compatible ara gas washers AGII, SPIT, C3 andTrack-It, It can be fixed: to profile E2000PB, E2000PG and 1000PVC, with NP 4x25 shock plug, with fx plug 6 screw 4,5x35/45. Alignment marking