There is 1 item in your cart.
Controllable relay via Bluetooth with voltage-free contacts. Compatible with Android devices.
From the APP for Smartphone "VarilampBT", available for FREE in the Play Store.
Within the "Varilamp BT" APP, select the operating mode as a pushbutton or as a switch. When the key is pressed, the tension-free contacts are closed. Instructions for connection to the Smartphone within the application.
Recommendations for installation and use strong>:
Thanks to its versatility, it can be associated to pulsation regulators or as a switch for a multitude of devices. p>
For homes, premises, doors, automatic, etc. p>
When associating it for the first time with the APP and with the APP and with the Bluettooth of the Smartphone, a password is requested that will be unique for each unit of product and that coincides with the last 4 digits of the serial number recorded on the label.
Once associated and saved as a known device, the connection will be automatic when you are near it with the Bluetooth enabled phone.
Technical characteristics :
12V - 24V / DC
30 months (from date to product)
Maximum power and type of load strong>
From 0W to 20000W (R) All types of loads. Multicarga
Overload, short circuit and overheating.
30 months (from date recorded in product)
Internal work rate strong>
Does not heat up: Incorporates 10A relay h4>
Terminal 4 lift poles for 2.5 mm cable
Degree of protection strong>
According to standards:
UNE-EN 55015 / A1 / A2; UNE-EN 61547 / A1; UNE-EN 60669-1 / A1 / Err; UNE-EN 60669-2-one
No customer reviews for the moment.
NO es necesario estar registrado
Si desea realizar cualquier pregunta sobre este producto o reportar algún tipo de incidencia con el mismo, pongase en contacto con nosotros rellenando el siguiente formulario.
30 other products in the same category: