Telecommunications
There are 84 products.
MOUNTED ANGLE SUPPORT 500 MM TELEVES 2406. Reinforced claws to fix masts to a wall, both for screwing, as for embedding. Application: Installations where it is required to place terrestrial TV antennas and radio in a mast to a wall. Made of zinc-plated iron.
Wide range of universal LNB's that allow to satisfy any need for all types of installations
MATV bypass terminal strip The sockets and junction boxes incorporate a new flange model whose main advantage is to facilitate the visualization of the connection in locations where the outlet is close to the ground.
T-100 Plus Coaxial Cable ITED2 NQ2b EN 50117-6 16PRtC 1.13 / 4.8 Class A 3GHz
MACHINE PLUGGED 1.45 X 35 X 1.5 MM TELEVES 2407 Masts for antennas with sections to assemble and in this way form a longer mast. Manufactured in galvanized steel Application: Installations where it is required to locate terrestrial TV antennas and radio at a high elevation.
Bracket for Screw Mastil Televes Bracket in the form of L to attach an antenna mast to a wall. Two equal supports are necessary to hold the mast in two points to be able to maintain it vertically.
Mast support for recessed wall in "I" reinforced 250mm by Televés ref. 2410 The mechanical elements are treated with the RPR (Protective Reagent Protective Coating) protection system, which adds an additional protection shield against oxidizing agents to the standard zinc coating process of all elements.
EMC bridge 48 mm Plug-in. Connector F load 75ohms For Televes T03 Series
Mast 1.45m x 35mm x Thickness 1.5mm Rpr BoxableMASTIL RPR BOXABLELong: 1.45 Meters Perimeter: 35 Millimeters Thickness: 1.5 Millimeters
Mast 2.5m x 35mm x Thickness 1.5mm Rpr BoxableMASTIL RPR BOXABLELong: 2.5 Meters Perimeter: 35 Millimeters Thickness: 1.5 Millimeters
Central made in armored zamak chassis, designed to reamplify an ICT installation. This type of installation covers the band 5-30 MHz, 47-862 MHz and 950-2150 MHz, where the MATV signals are the same in the two down cables. Being an amplifier whose application is in ICT reamplifications, it will only be necessary to connect the two input cables and the two output cables with the amplifier turned off.
